3D Printing a Cord Wall Pass-through

Instead of using traditional square-holed wall pass-through boxes, we came up with a minimal way to pass cords through walls with 3D printing. Check out the video and get the download below

WAYS TO SUPPORT US

---

We made a simple wall cord pass-through. I don't recommend using this to pass anything from outside to inside 😉.

• Two Internal Diameter Options: 1.05" or 1.25"

• Minimum Wall Thickness: 3.6"

• Maximum Wall Thickness: 5.4"

• Higbee start threads

Supplies

Includes Affiliate Links

• White PETG

• Hole Saws

  • 1.5" Hole Saw - for 1.05" ID version

  • 1.75" Hole Saw -  for 1.25" ID version

  • Adjustable (like I use in video that might not go small enough)

Print Settings

• Used PETG but PLA would work likely too.

• Layer Height:  0.16mm

• Walls: 3

• Top / Bottom Surface:  Concentric

• Infill:  15%, Gyroid

• Slow Down for Overhangs:  ✔ 

• No Brim or Support Needed

• Slower Outer and Inner Walls will make for a better thread (100 mm/s on X1)

---

PDX CNC Products

---

DO US A FAVOR — SUBSCRIBE TO OUR YOUTUBE?

 

Click to subscribe ⤴

 

---

If this helped you out, consider Buying Me a Coffee:

---