Portland CNC

View Original

Better ShopSabre Router Dust Boot

Increase your ISO 30 CNC Router tool capacity & improve dust collection with our ATC Pedestals.

It works splendidly with our PDX CNC Dust Boot.

See it in action in video below.

See this content in the original post

Dust Boot Available Now


BIG CFM BOOST

Our Dust Boot has a standard 5-inch intake port. Theoretically this allows 545 CFM which improves from the 3.4” internal port on the stock ShopSabre dust boot port (~288 CFM).


EASY NO-MODIFICATION SWAP

No need to modify your ShopSabre CNC Router. You can swap out your existing dust boot with ours in a couple minutes.

Only a Phillips Screwdriver needed

MORE COMPACT AND FOCUSED

Making the boot more compact and our air intake closer to the cutting action means more focused airflow to better extract chips before they go airborne.

WORKS WITH

HSD 5HP & 10HP spindles - more to come, see compatibility list on product page.



See FAQ’s here.



Order a Dust Boot


See this content in the original post